Customs inspection and X-ray scanning: what happens to your shipment
Customs inspection in Saudi Arabia is customs checking goods after the declaration is registered to confirm they match the declared type, quantity, origin and value. Shipments are selected through risk management, and the check may be an X-ray scan without opening the container, a physical examination in the presence of the owner or their representative, or sampling for analysis.
In this article
- What is customs inspection and why is your shipment selected?
- What paths can your shipment take after the declaration?
- How does X-ray scanning work at Saudi ports?
- What happens in a physical customs examination?
- When are samples taken and other agencies involved?
- What if the customs inspection result differs from the declaration?
- Can you check your goods before declaring, and does control end at release?
- How can you reduce inspection delays?
What is customs inspection and why is your shipment selected?
The GCC Common Customs Law, applied in the Kingdom, provides that goods are inspected after the declaration is registered, according to risk management criteria and any other criteria customs sets. So customs inspection in Saudi Arabia is not a penalty or an accusation; it is a normal part of control. Not every shipment is opened, but any shipment can be selected, even for an importer with a clean record.
Risk management weighs factors such as the type of goods and HS code, the countries of origin and shipment, the history of the importer and broker, and how consistent the invoice, declaration and manifest are. Customs does not publish its criteria, and nobody should promise you that a shipment will not be inspected. What you can do is make your data clear and consistent, and be ready if you are selected.
What paths can your shipment take after the declaration?
After the declaration is filed on FASAH, a shipment usually follows one or more of these paths. Knowing them helps you estimate time and prepare:
| Path | What happens | What you need to do |
|---|---|---|
| Release without inspection | Declaration accepted, duty paid, release issued | Pay duty, collect the DO, arrange haulage |
| Document review | The officer asks for a document or clarification first | Respond quickly through your broker |
| X-ray scan | The container passes through a scanner unopened | Wait for the result; it may be referred for physical examination |
| Physical examination | The container or packages are opened and matched with the declaration | Broker attends; you bear haulage, opening and repacking costs |
| Referral or lab analysis | Samples are taken or an agency such as SFDA or the standards body reviews | Provide certificates and wait; release against a guarantee may be possible |
Tip: Timing for each path varies by port, workload and product. Never promise your customers delivery dates that assume release without inspection, and always keep a time buffer within the container’s free days.
With LCL shipments, your cargo can be held because another consignment in the same container was referred for inspection, since the box is checked as a whole before its contents are split. That is another reason to use a consolidator with compliant customers and to allow a wider time buffer for this kind of shipping.
How does X-ray scanning work at Saudi ports?
X-ray scanning is non-intrusive: the container or truck passes through a scanner that images its contents without opening it, and the officer compares the image with what was declared in terms of type, density and layout. It is far quicker than a full devanning and lets customs screen many containers without holding them up.
If the image is consistent with the declaration, the shipment moves on. If something needs checking, such as unexplained voids, density that does not match the description, or concealed packages, the container is referred for physical examination. That is why a precise description matters, and why mixed loads should be itemized line by line.
What happens in a physical customs examination?
In a physical examination the container is moved to the inspection area, opened, and partly or fully unloaded as the examiner decides. Items, quantities, markings and origin are matched against the declaration and invoice. The customs law sets out practical points every importer should know:
- Where: inspection takes place at the customs office, and in some cases may be carried out elsewhere under rules set by customs.
- Who pays: moving the goods to the inspection site, opening packages, repacking and all other work the inspection requires are at the owner’s expense.
- Attendance: inspection is carried out in the presence of the owner or their representative, usually the customs broker.
- Absence: customs may open and inspect packages without the owner or representative if they fail to attend at the set time despite notice, and records the result in a report.
From our experience as brokers at Jeddah Islamic Port, what drags an examination out most is poor packing: unmarked packages, mixed items in one carton, and a generic packing list that does not say what each package holds. Neat, numbered pallets save hours and reduce the risk of damage when goods are opened.
When are samples taken and other agencies involved?
Customs has the right to have goods analyzed by competent bodies to confirm their type, specifications or compliance. For goods subject to special requirements, such as food, cosmetics and products under technical regulations, the shipment may be referred to SFDA or require conformity certificates through SABER, and customs coordinates with these agencies under risk-based release.
The law allows goods awaiting test results to be released against guarantees that they will not be disposed of before the result is known. Goods found to be harmful or not compliant with approved standards may be ordered destroyed at the owner’s expense and in their presence, or re-exported to their origin where required.
Tip: If your product needs a conformity certificate or registration with a regulator, get it before the shipment arrives. Waiting for a certificate while the container sits at port is one of the most common causes of storage charges. See SABER product and shipment certificates.
What if the customs inspection result differs from the declaration?
Duty is collected on the basis of the declaration, but if inspection reveals a difference, duty is collected on the inspection result, without prejudice to customs’ right to impose any fines due. If customs cannot verify the declaration from the goods or documents, it may suspend the inspection and request supporting documents, and it may re-inspect.
So if you discover an error in your declaration, do not wait. The law lets the declarant request a correction in writing before the declaration is referred for inspection; after that, a discrepancy becomes a potential violation. Read the Saudi customs declaration: filing and amending and customs violations and penalties in Saudi Arabia to see what differences can lead to.
Can you check your goods before declaring, and does control end at release?
Yes. The law allows owners or their representatives to view their goods before filing the declaration and to take samples where needed, with the customs director’s permission and under customs supervision; such samples are subject to the applicable duty. This helps when you suspect the supplier shipped items or quantities that differ from the invoice, so you can confirm before declaring data that may not match reality.
It is also worth knowing that release does not end control. ZATCA may review declarations later through post-clearance audit and ask for documents and records from past shipments. Keep a complete file for each shipment: invoice, packing list, bill of lading, certificates, proof of payment and any inspection results.
How can you reduce inspection delays?
- Describe goods precisely on the invoice and declaration, with the right HS code for each line.
- Provide a detailed packing list showing each package’s contents, weight and marks.
- Pack in an orderly way on numbered pallets, without unexplained mixing of items.
- Have conformity certificates and registrations ready before arrival.
- File early through pre-clearance when the shipment qualifies, so review starts before the vessel arrives.
- Use a broker who attends promptly and answers document requests quickly.
At Fares Customs Clearance we review documents before filing to remove common triggers for referral, attend inspections at Jeddah Islamic Port and King Abdullah Port on the client’s behalf, and follow results through to release. If your shipment is under inspection now, contact us and we will look at where it stands.
Frequently asked questions
Is every shipment subject to customs inspection?
No. Customs inspection in Saudi Arabia follows risk management after the declaration is registered: some shipments are released without inspection, some are X-rayed, and some are examined physically or sampled. Nobody can guarantee a shipment will not be inspected, but accurate, consistent data reduces the triggers for referral.
Who pays for a customs inspection?
Under the customs law, moving goods to the inspection site, opening packages, repacking and all other work the inspection needs are at the owner’s expense. Time adds to that: waiting days can increase port storage and demurrage once free periods run out.
Do I have to attend the inspection myself?
Inspection is carried out in the presence of the owner or their representative, which in practice is usually the authorized customs broker. If the owner or representative fails to attend at the set time despite notice, customs may open and inspect the packages without them and record the result.
What happens if customs finds goods that do not match the declaration?
Duty is collected on the inspection result rather than the declaration, and fines may apply depending on the violation. Goods found harmful or non-compliant may be ordered destroyed at the owner’s expense or re-exported. That is why you should correct any error before the declaration is referred for inspection.
Does an X-ray scan mean the container will be opened?
Not necessarily. The scan images the container’s contents without opening it, and if the image matches the declaration the shipment continues. If something needs checking, the container may be referred for physical examination and opened with the broker present.
Sources
- ZATCA: GCC Common Customs Law and implementing regulations (Arabic)
- FASAH: About the system
- SFDA: Cooperation with customs on risk-based release (Arabic)
- ZATCA: Customs broker authorization
Regulations and procedures change. Check the official source before acting. This article is general information, not individual advice.