Importing electrical and electronic goods: SABER and standards
To import electronics to Saudi Arabia, each product is registered on SABER and shown to meet its technical regulation, through a certificate of conformity or SASO’s IECEE recognition certificate, plus a Saudi energy-efficiency label for covered appliances. A shipment certificate is then issued per consignment, and the declaration is filed on FASAH with duty and 15% VAT.
In this article
- Why are electrical goods different from other imports?
- Which technical regulations apply to electrical and electronic goods?
- What is the IECEE recognition certificate and who needs it?
- What is the energy-efficiency label and when is it needed?
- How does the SABER conformity process work for electrical goods?
- What is checked on the device itself during inspection?
- How should you plan timing before the first shipment?
- Which documents and charges apply at clearance?
- What mistakes delay electrical goods shipments?
Why are electrical goods different from other imports?
When you import electronics to Saudi Arabia, it is not enough that the product works and is safe. One appliance can face three layers of requirements at once: electrical safety and EMC under SASO regulations, energy efficiency for products such as air conditioners and fridges, and telecom requirements for wireless devices regulated by the Communications, Space and Technology Commission (CST).
All of this is managed on SABER before the shipment arrives, which is why we tell clients at Fares to start the conformity file in parallel with supplier negotiations, not after loading. If your company is not registered yet, start with registering on SABER step by step.
Which technical regulations apply to electrical and electronic goods?
SABER publishes its list of applicable regulations. The most relevant for this sector include:
- Technical regulation for low-voltage electrical equipment and appliances.
- Electromagnetic compatibility.
- Restriction of hazardous substances in electrical and electronic equipment.
- Standby and no-load requirements.
- Communication and IT equipment.
- The general technical regulation for energy efficiency.
- Electrical batteries, and small solar PV systems.
Identifying the right regulation starts with the HS code, because SABER maps products to regulations through the code or category. A wrong code can mean a wrong or incomplete certificate, so read HS codes and tariff classification before registering products.
What is the IECEE recognition certificate and who needs it?
The IECEE national recognition certificate is issued by the Saudi National Certification Body on the basis of a certificate from the international IECEE CB Scheme, confirming compliance with applicable regulations and standards, taking national differences into account. Products SASO lists for this certificate include:
- Mobile phones and accessories, power banks, charging cables.
- Smart watches, desktop and laptop computers, tablets, game consoles and accessories.
- Televisions and monitors, lighting and its parts.
- Dishwashers, electric kettles, coffee makers, electric fryers, shavers.
- Electric pumps up to 5 hp, electrical cables, circuit breakers, small solar PV systems.
Documents required
- Commercial registration, plus industrial registration for manufacturers.
- Declaration form completed by importer and manufacturer.
- Product photos, dimensions and label if not in the test report.
- User manual in Arabic and English.
- CB test report (CBTR) from an approved laboratory, with a plug complying with Saudi standard SASO 2203.
- CB test certificate (CBTC) from an approved national certification body.
- Energy-efficiency certificate and label where required, CST conformity certificate where required, and USB test reports to SASO IEC 62680 where required.
If the test report is more than three years old, SASO asks for a declaration that the product and standard have not changed.
What is the energy-efficiency label and when is it needed?
SASO licenses the use of energy-efficiency labels under the general technical regulation for energy efficiency. Products on SASO’s efficiency labels page include:
- Small and large capacity air conditioners.
- Refrigerators and freezers, washing machines, clothes dryers, dishwashers.
- Water heaters, lighting products, rotating electrical machines (motors).
- Tyres and new light vehicles.
An air conditioner or fridge therefore needs two tracks: safety conformity, and a Saudi efficiency label based on testing to the Saudi standard in a SASO-registered laboratory. Efficiency requirements for air conditioners in particular are updated from time to time, so a model accepted years ago may not meet today’s minimum. Check with the manufacturer before ordering.
Tip: A European or Chinese energy label on the carton does not count. What is required is the Saudi efficiency label issued under SASO’s system, based on testing to the Saudi standard.
How does the SABER conformity process work for electrical goods?
- Register your company on SABER with your commercial registration.
- Add each model with its HS code, name, model number and brand.
- See which certificate SABER requires: a certificate of conformity, the IECEE recognition certificate, the Gulf conformity mark, or another type.
- Upload documents and reports, choose an accepted conformity assessment body, and complete the efficiency label if required.
- Once the product certificate is issued, request a shipment certificate per consignment with invoice data and quantities.
The table below gives illustrative examples; the final reference is what SABER specifies for your product’s code:
| Product | Expected requirement | Notes |
|---|---|---|
| Mobile phone, power bank, smart watch | IECEE recognition certificate | Plus CST conformity for wireless devices where required |
| Laptop, TV, monitor | IECEE recognition certificate | User manual in Arabic and English |
| Air conditioner, fridge, washing machine | Safety conformity + energy-efficiency label | Testing in a SASO-registered lab |
| Other low-voltage household appliances | Certificate of conformity under the LV regulation | As shown on SABER for the code |
| Batteries | Batteries technical regulation route | Separate regulation |
For the difference between product and shipment certificates, see SABER product and shipment certificates.
What is checked on the device itself during inspection?
- Plug: compliance with Saudi plug standard SASO 2203, one of the most frequent remarks on small appliances.
- Voltage and frequency: ratings suitable for the Saudi grid, which runs at 60 Hz.
- Markings: model number and brand on the device and carton must match the certificate.
- User manual: Arabic and English where the certificate requires it.
- Marks: required conformity marks or efficiency label present on the product.
Any difference between the shipped model and the approved one, even a single character in the model number, can stop the shipment, because shipment certificates are tied to specific models.
How should you plan timing before the first shipment?
The costliest mistake in this sector is booking freight before certificates are complete. Lab testing, conformity body review and efficiency label issuance all take time the importer does not control. The practical order we suggest:
- List the models and their HS codes and find out on SABER which certificate each one needs.
- Collect test reports and documents from the factory, and order new tests for anything missing.
- Obtain the product certificates and efficiency labels.
- Only then confirm the booking, and request the shipment certificate before the cargo arrives.
If you import several models from one supplier, start with the best sellers, and never load a model whose certificate is incomplete: a single uncovered line can hold up clearance of the whole container.
Which documents and charges apply at clearance?
Once SABER is complete, the broker files the declaration on FASAH with: an itemized commercial invoice showing model number, quantity and value per line, the packing list, bill of lading, certificate of origin and shipment certificates. See our guide to documents required for import and export.
Most electrical and electronic goods fall in Chapters 84 and 85 of the tariff, and rates vary by heading. Duty is charged on the customs value, then 15% VAT on the value plus duty. Estimate costs with our duty and VAT calculator.
What mistakes delay electrical goods shipments?
- Shipping models not registered on SABER, or registered under a different HS code.
- Invoices saying “assorted electrical appliances” without model numbers.
- European or UK plugs that don’t meet the Saudi standard.
- Air conditioners that miss current efficiency requirements.
- Wireless devices without CST conformity.
- Outdated test reports or reports from non-approved laboratories.
Tip: Before confirming the order, send your supplier the list of models and codes and ask for CB reports, the Arabic manual and a photo of the plug for each model. Whatever they cannot provide now will be harder to get after shipping.
Fares handles SABER files and clearance at Jeddah Islamic Port and King Abdullah Port; you can contact us to review your model list before shipping.
Frequently asked questions
Do electrical appliances need to be registered on SABER?
Yes. Electrical and electronic products covered by technical regulations are registered on SABER and need either a product certificate of conformity or the IECEE recognition certificate depending on the product, followed by a shipment certificate for each consignment. SABER determines the required certificate from the HS code and category you select.
Which products need the IECEE recognition certificate?
SASO lists, among others: mobile phones and accessories, power banks, smart watches, laptops, desktops and tablets, TVs and monitors, lighting, dishwashers, kettles, coffee makers and fryers, game consoles, cables and circuit breakers, pumps up to 5 hp and shavers. Check the current list on SASO’s website before shipping.
Does an air conditioner need an energy-efficiency label?
Yes. Small and large capacity air conditioners are among the products covered by SASO’s energy-efficiency labels, along with fridges, washing machines, dryers, water heaters and lighting. The label is based on testing to the Saudi standard in a registered laboratory, and the model must meet the minimum in force at the time of import.
Are European plugs accepted on imported appliances?
SASO’s documents for the IECEE recognition certificate require a plug complying with Saudi standard SASO 2203. Appliances should therefore be manufactured with a compliant plug or corrected before shipping in a way the authority accepts. Non-compliant plugs are a recurring inspection remark that can hold up a shipment.
Do wireless devices need an extra approval?
Often, yes. SASO lists a conformity certificate from the Communications, Space and Technology Commission among the documents for the IECEE recognition certificate where required. This concerns devices using wireless communication such as phones, smart watches and wireless earphones. Check CST’s requirements for your model before shipping.
Sources
- SABER: list of technical regulations
- SASO: IECEE certificates
- SASO: energy efficiency labels
- Communications, Space and Technology Commission
- FASAH trade platform
- ZATCA
Regulations and procedures change. Check the official source before acting. This article is general information, not individual advice.