Importing from China to Saudi Arabia: shipping and clearance
Importing from China to Saudi Arabia runs in four stages: checking the tariff line and product requirements before paying the supplier, agreeing Incoterms and choosing sea or air freight, preparing documents and SABER conformity certificates, and finally filing the customs declaration on FASAH through a licensed broker, paying duty and VAT, and securing release.
In this article
- How do you start importing from China to Saudi Arabia?
- What should you check before paying a Chinese supplier?
- Which Incoterms work best when importing from China?
- Sea or air, full container or shared?
- What documents does a shipment from China need?
- How do SABER certificates work for Chinese products?
- How is the shipment cleared when it reaches Jeddah?
- What are the common mistakes when importing from China?
How do you start importing from China to Saudi Arabia?
China is one of the largest sources of goods for the Saudi market, from electronics and spare parts to furniture, clothing and building materials. But success in importing from China to Saudi Arabia is not measured by the factory price alone. A cheap consignment becomes expensive if it lands in Jeddah without a conformity certificate or with an invoice that does not describe the goods, and then sits in port accumulating storage charges.
Before contacting suppliers, make sure your Saudi side is in order:
- A valid commercial registration (CR) covering the import activity for your goods (or a national ID for limited personal imports).
- An activated account on ZATCA’s FASAH platform.
- A SABER account if your product falls under Saudi technical regulations.
- A licensed customs broker authorized on FASAH for your port of arrival; see how to verify and authorize a broker.
What should you check before paying a Chinese supplier?
Most problems we see at port could have been avoided before payment. Get the full technical specifications from the supplier, then answer these questions with your broker:
- What is the HS code? It determines the duty rate and any restrictions. You can search ZATCA’s Integrated Tariff service; see our guide to HS codes and classification.
- Is the product covered by a Saudi technical regulation? If so, you will need a SABER product certificate before shipping.
- Does another agency need to approve it? For example, the SFDA for food, cosmetics and medical devices.
- Is it prohibited or restricted? Some goods cannot be imported at all or need special permits.
- Do the labels comply? Some regulations require Arabic information or energy-efficiency labels on the product itself.
Tip: Do not rely on a supplier saying “we ship to Saudi all the time”. Ask for test reports covering the exact model you are buying, and check the SABER requirements for its HS code before sending the deposit.
Which Incoterms work best when importing from China?
The Incoterm in your contract decides who pays freight and insurance and who carries the risk at each stage. It also affects the customs value, because duty is calculated on the value including freight and insurance to arrival. More in Incoterms and how they affect clearance and cost.
| Term | Supplier covers | Importer covers | Practical note |
|---|---|---|---|
| EXW | Goods ready at the factory only | Inland China transport, export, freight, insurance | Needs a strong forwarder in China |
| FOB | Delivery on board at the Chinese port | Ocean freight, insurance, Saudi clearance | Common, and you control the shipping line |
| CFR / CIF | Freight (plus insurance under CIF) to the destination port | Local port charges, clearance, haulage | Easy, but watch destination charges from the supplier’s agent |
| DAP / DDP | Delivery to your address (with duties under DDP) | Unloading; under DAP also clearance and duties | Under DDP, confirm who will file the declaration in your name |
Sea or air, full container or shared?
Ocean cargo usually leaves major Chinese ports such as Shanghai, Ningbo, Shenzhen, Qingdao and Guangzhou and arrives at Jeddah Islamic Port or King Abdullah Port in Rabigh on the west coast, or at eastern ports depending on where your warehouse is. The choice depends on volume, value and urgency:
| Method | Best for | Watch out for |
|---|---|---|
| Full container (FCL) | Volumes that fill or nearly fill a container | The shipping line’s free time, to avoid demurrage |
| Shared container (LCL) | Small and medium volumes | Goes through consolidation; other consignees’ paperwork can affect timing |
| Air freight | Light, high-value or urgent goods | Higher cost per kilo; cleared at the airport |
| Express courier | Samples and small parcels | Not suited to commercial volumes; conformity rules still apply |
For a detailed comparison see LCL vs FCL.
What documents does a shipment from China need?
ZATCA’s import guidance lists the commercial invoice and bill of lading as the core documents, plus a certificate of origin unless the origin is clearly marked on the goods, together with any product-specific certificates or registrations.
- Commercial invoice: in the importer’s name, with a clear description of each item (material, model, use), quantity, unit price, total, Incoterm and country of origin.
- Packing list: packages, weights and volumes, consistent with the invoice.
- Bill of lading or air waybill: the consignee must match the importer registered on FASAH.
- Certificate of origin: in China usually issued by CCPIT or Chinese customs. We recommend getting one even when goods are marked “Made in China”, as it heads off origin queries.
- SABER certificates: product and shipment certificates for regulated goods, or a self-declaration for non-regulated goods.
- Other approvals depending on the product, such as SFDA.
For the general list, see documents required for import and export.
How do SABER certificates work for Chinese products?
SABER, run by the Saudi Standards, Metrology and Quality Organization (SASO), is the online gateway for conformity certificates and is linked to FASAH. SABER warns that failing to register the required conformity and shipment certificates can lead to a shipment being re-exported. In broad terms:
- Regulated products: need a Product Certificate of Conformity (PCoC) issued by an approved conformity assessment body after reviewing test reports, then a Shipment Certificate (SCoC) for each consignment.
- Non-regulated products: usually need a self-declaration of conformity and a shipment certificate through the platform.
- Fees: SABER publishes its own fees on its website, and the conformity assessment body charges separately; check before budgeting.
The best time to obtain the product certificate is before goods leave China, because the assessment body may ask the factory for reports or changes that are hard to get once the vessel has sailed. Details in SABER product and shipment certificates.
How is the shipment cleared when it reaches Jeddah?
- The forwarder sends an arrival notice; you pass the bill of lading, invoice and other documents to your broker as soon as they are available.
- The broker checks the HS code, value and SABER certificates and files the declaration on FASAH. ZATCA encourages filing before the vessel arrives.
- Customs duty and VAT (15% on the value plus duty) are assessed and paid electronically.
- The shipment may be selected for inspection or X-ray; the broker attends and answers queries.
- After release, the delivery order is collected from the shipping line, port charges are paid, and the container is hauled to your warehouse.
You can estimate duty and VAT in advance with our duty and VAT calculator, and read about the port itself in customs clearance at Jeddah Islamic Port. Fares Office handles this whole stage at Jeddah Islamic Port and King Abdullah Port, including haulage to your warehouse when needed.
What are the common mistakes when importing from China?
- Vague invoice descriptions such as “spare parts” or “household items”, leading to queries, delays and possible reclassification.
- Invoice values that do not reflect the real price: customs can review the value, and differences may mean extra duty or a violation.
- Shipping before the SABER product certificate is ready, then waiting for it while the container sits in port.
- A consignee name on the bill of lading that differs from the CR registered on FASAH.
- Mixing many product types in one LCL shipment with different requirements, so one item holds up everything.
- Relying on DDP without knowing who will clear the goods and in whose name.
Tip: Ask the supplier for a draft invoice and packing list before shipping and send them to your broker for review. Fixing a document in China takes a day; fixing it after the container lands can cost days of storage.
Frequently asked questions
What is the first step in importing from China to Saudi Arabia?
Start by identifying the HS code for your product and its requirements before paying the supplier: the duty rate, whether it falls under a technical regulation needing a SABER certificate, and whether another agency must approve it. Then make sure you have a CR, an activated FASAH account and a licensed customs broker authorized at your port.
Do I need a certificate of origin for goods from China?
ZATCA’s guidance says a certificate of origin is not mandatory if the origin is clearly marked on the goods. In practice we still recommend asking your supplier for one issued by CCPIT or Chinese customs, as it heads off origin queries during clearance and keeps the file complete.
Do all Chinese products need a SABER certificate?
Products covered by Saudi technical regulations need a product certificate from an approved conformity assessment body, then a shipment certificate for each consignment. Non-regulated products usually need a self-declaration and a shipment certificate on SABER. Check the requirements for your HS code on the platform before shipping.
How much customs duty is charged on goods from China?
There is no single rate. Duty is set by the customs tariff for each HS code and calculated on the value including freight and insurance. VAT at 15% is then charged on the value plus duty. Use ZATCA’s tariff inquiry service or a duty calculator to estimate the amount for your goods.
Is sea or air freight better for importing from China?
Sea freight is cheaper for large volumes and heavy goods, whether by full container or shared container, but takes longer. Air freight is faster and suits light, high-value or urgent goods at a higher cost. Either way, the clearance and conformity requirements in Saudi Arabia are the same.
Sources
- ZATCA: Import guidelines (Arabic)
- ZATCA: Integrated Customs Tariff Inquiry
- SABER platform (SASO)
- ZATCA: Customs Broker Authorization e-service
Regulations and procedures change. Check the official source before acting. This article is general information, not individual advice.